How to Revive Your Dingy Outdoor Furniture
If your patio furniture has lost its luster, don’t toss it out. A little elbow grease along with the right tools can turn your dingy patio furniture into like-new lounge areas. Here’s what you need to bring your furniture back to life:
- White Resin Furniture: Use a bleach/water solution (1 part bleach to 5 parts water) along with a fine steel wool pad to easily scrub away the grimy gray film on your furniture (as pictured). Don’t forget a pair of gloves.
- Aluminum Furniture: Mix 1 teaspoon dishwashing soap with a gallon of warm water. Dip a sponge in the solution and scrub the furniture. Rinse with a hose.
- Wrought Iron Furniture: Use a broom or bristled brush to remove dirt and debris from crevices, then hose it down thoroughly. Add a teaspoon of dishwashing liquid to a gallon of water and gently scrub the iron, then rinse thoroughly. Wipe furniture down with a towel.
- Teak Furniture: Use a soft brush to clear dirt and dust away. Then, use a mild wood soap solution with a damp rag to clean the wood. Rinse with a hose and allow to dry.
- Wicker Furniture: Use a hose vacuum to remove dirt and debris from the tight weave, then dust with a dry paint brush. Mix 1 teaspoon mild wood soap with 1 gallon of warm water and use a soft rag or sponge to wash the furniture. Rinse with hose and wipe down with a clean towel.
- Canvas Cushions: Mold and mildew can build up on the edges and underside of canvas fusions. Mix 1 teaspoon dishwashing detergent with 1 teaspoon Borax in one quart of warm water and fill a spray bottle. Thoroughly saturate the entire surface of the cushion, especially in the creases, crevices and edges. Allow the solution to sit for 15-20 minutes, then using a garden hose with a jet attachment, spray the cushions to release the solution and the grime. Stand the cushions on edge and allow to dry in a sunny spot until just damp. Then spray with a fabric protector to prevent future mildew. Allow to dry thoroughly in the sun.
NOTE: Always test in an inconspicuous area before treating an entire surface!